สินค้าของเราทั้งหมด
ABSOLUTE Digimatic Caliper 500 Series
Series 500
FEATURES
Mitutoyo’s absolute Digimatic Caliper is the next generation of electronic calipers.
It keeps track of its origin point once set. Whenever turned on, the large LCD
displays the actual slider position ready to start measurement. No more repeated
zero setting is necessary with the absolute encoder technology, as well as no more
concern for over speed errors..
Technical Data
Accuracy: Refer to the list of specifications
Resolution: 0.01mm or .0005″/0.01mm
Repeatability: 0.01mm / .0005”
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Back Plunger Type Indicators Series 1
Back Plunger Type Indicators Series 1
Technical Data
▶ Range: 1(plunger stroke: 4,5)
▶ Range per rev.: 1,27 mm
▶ Graduation: 0.01 mm
▶ Scale: 50-0-50
▶ Measuring force: 0,4 – 1,4 N
▶ Mass: 80 g
▶ Delivered: Delivered with factory certificate
▶ Balanced dial: Yes
▶ One revolution: Yes
▶ Shockproof: Yes
▶ Repeatability: 3 µm
▶ Any 1/10 revolution: 7 µm
▶ Hysteresis error: 3.5 µm
▶ Inch-Metric: Metric
Bore Gages Series 511
Bore Gages Series 511-for Small Holes
Technical Data
▶ Accuracy:5µm/.0002”
▶ Indication stability:2µm/.00008”
▶ Graduation:0.01mm,0.001mm,.0005” or.0001″
Bore Gages- Series 511
Bore Gages- Series 511-Standard Type
Technical Data
▶ Accuracy: 2µm/.00008”
▶ Indication stability: 1µm/.00004”
▶ Graduation: 0.01mm, 0.001mm, .0005″ or .0001″
Borematic 568
Borematic 568-ABSOLUTE Digimatic Snap-Open Bore Gages
Technical Data
▶ Accuracy: Refer to the list of specifications
▶ Resolution: 0.001mm or .00005″/0.001mm
▶ Contact point: Carbide or titanium coating* (*over 12mm/.5″ models)
▶ Measuring method: Three-point method
▶ Display: LCD
▶ Battery: SR44 (1 pc.) (938882)
▶ Battery life: Approx. 7,000 hours
Combination Square Sets Series 180
Combination Square Sets Series 180
▶ degrees to an edge of a workpiece.
▶ Center head: Used to locate centers of round workpieces
▶ Protractor head: Used to set the rule at a desired angle to
an edge of a workpiece. Also used for measuring angles.
Coolant Proof Caliper Series 500
ABSOLUTE Coolant Proof Caliper Series 500 with Dust/Water Protection Conforming to IP67 Level
Technical Data
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Repeatability: 0.01mm / .0005”
▶ Display: LCD
▶ Length standard: ABSOLUTE electromagnetic induction
linear encoder
▶ Max. response speed: Unlimited
▶ Battery: SR44 (1 pc./2 pcs*), 938882
▶ Battery life: Approx. 5 years under normal use
(1 year: over 300mm / 12” models)
Dust/Water protection level:IP67
0 – 300mm model
Coolant Proof Micrometer Series 293
Coolant Proof Micrometer Series 293-with Dust/Water Protection Conforming to IP65 Level
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.001mm or .00005″/0.001mm
▶ Flatness: 0.3µm/.000012”
▶ Parallelism: 1µm/.00004” for models up to 50mm/2”
▶ 2µm/.00008” for models up to 100mm/4”
▶ 3µm/.00012” for models up to 175mm/7”
▶ 4µm/.00016” for models up to 275mm/11”
▶ 5µm/.0002” for models over 300mm/12”
▶ Measuring faces: Carbide tipped
▶ Display: LCD
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 1.2 years under normal use
▶ (8 months: over 100mm models)
▶ Dust/Water protection level: IP65
Dial Calipers Series 505
Dial Calipers – Series 505
▶ New designed dial movement for ultra smooth sliding and high shock protection.
▶ Can measure OD, ID, depth, and steps.
Dial Depth Gage Series 7
ABSOLUTE Dial Depth Gage Series 7
Technical Data
▶ Dial reading: 0.01mm or .001”
▶ Flatness of base face: 5µm or 2µm
▶ Contact point: Carbide-tipped ball point(needle point:7210, 7222)
▶ Measuring force: 1.4N (2.5N: 7213, 7214, 7217, 7218)
Dial Height Gage Series 192
Dial Height Gage Series 192-with Digital Counter
▶ Easy and error-free reading with both up and down digital counters as well as a dial.
▶ Provided with a feed wheel for easy coarse feeding.
▶ Carbide-tipped scriber is provided.
▶The counters and dial can be re-zeroed at any scriber position
Dial Indicators Series 1
Dial Indicators Series 1-Compact Type-Small Diameter
Features
▶ Range: 0.01 inch
▶ Graduation: 0.0001″
▶ Accuracy: ±0.0002″
▶ Range per rev.: 0.004″
▶ Repeatability: ±0.00003″
▶ Scale: 0-2-0
▶ Measuring force: ≤ 1.8 N
▶ Mass lug/plain: 50/47 g
▶ Balanced dial: Yes
▶ Jeweled bearing: Yes
▶ Functions: ANSI/AGD type
▶ Inch-Metric: Inch
Dial Indicators Series 2
Dial Indicators Series 2- Metric Standard Type
Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.
▶ Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard.
▶ The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
▶ Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
▶ The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
▶ A carbide contact point is used.
▶ The grand gear uses stainless steel that is resistant to wear and deformation.
▶ Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.
Dial Indicators Series 3
Dial Indicators Series 3-Large Stroke Type, Large Diameter
Technical Data
▶ Range: 10mm
▶ Graduation: 0.01mm
▶ Range/Rev: 1mm
▶ Dial Reading: +/- 0-100
▶ Type: with lug
▶ Accuracy: 0.015mm
▶ Measuring force: 1.4N or less
▶ Stem/Shank: 8mm
▶ Contact Point: M2.5 x 0.45 Thread
▶ Shockproof Type: N
▶ Jeweled Bearing Type: N
▶ With Coaxial Revolution Counter Type: N
▶ With Damper at Lowest Rest Point Type: N
▶ Type: ISO/JIS
Dial Snap Meters Series 523
Dial Snap Meters – Series 523
Technical Data
▶ Dial indication accuracy: 1µm / .00005”
▶ Indication repeatability: 0.4µm / .00002”
▶ Dial reading: 0.001mm or .00005″
▶ Flatness: 0.3µm / .000012”
▶ Parallelism: 0.6µm / .000024” for
models up to 50mm / 2”
1µm / .00004” for models over 50mm / 2”
▶ Measuring force: 5 – 10N (500 – 1000gf)
Dial Test Indicators SERIES 513
Dial Test Indicators – SERIES 513-Horizontal Type
▶ Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access.
▶ No-clutch structure for automatic reversal of measuring direction.
▶ One-piece bezel and crystal design with O-ring provide resistance to water and dust.
▶ The glare-free flat crystal face has a scratch-resistant coating.
▶ High sensitivity and quick response because of jeweled bearings.
▶ Standard carbide contact point provide.
Digimatic & Vernier Caliper Series 550
ABSOLUTE Digimatic & Vernier Caliper Series 550,160-with Nib Style Jaws
Technical Data
▶ Accuracy: Refer to the list of specifications
▶ Display*: LCD
▶ Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. response speed*: Unlimited
▶ Battery*: SR44 (1 pc.), 938882
▶ Battery life*: Approx. 3.5 years under normal use
*Digital models **Analog models
Digimatic Caliper Series 551
ABSOLUTE Digimatic Caliper Series 551 with Nib Style and Standard Jaws
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution*: 0.01mm or .0005″/0.01mm
▶ Display*: LCD
▶ Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. response speed*: Unlimited
▶ Battery*: SR44 (1 pc.),938882
▶ Battery life*: Approx. 3.5 years under normal use
Digimatic Depth Gage Series 547
ABSOLUTE Digimatic Depth Gage Series 547
Technical Data
▶ Resolution*: 0.001mm, 0.01mm, .00005″/0.001mm or .0005”/0.01mm
▶ Flatness of base face: 5µm
▶ Measuring force: 1.4N, 1.5N
▶ Display: LCD
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 3.5 years under normal use
Digimatic Height Gage Series 192-Multi-Function
Digimatic Height Gage Series 192-Multi-Function Type with SPC Data Output
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Display: LCD, 7-digit
▶ Max. response speed: 500mm/s
▶ Battery: SR44(1pc.), 938882
▶ Battery life: Approx. 2000 hours under normal use
Digimatic Height Gage Series 192-Standard
Digimatic Height Gage Series 192-Standard Type with SPC Data Output
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Display: LCD, 7-digit charter height 11mm
▶ Max. response speed: 500mm/s
▶ Battery: SR44(1pc.), 938882
▶ Battery life: Approx. 2000 hours under normal use
Digimatic Height Gage Series 570
ABSOLUTE Digimatic Height Gage Series 570-with ABSOLUTE Linear Encoder.
Technical Data
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Display: LCD, 6-digit
▶ Length standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. response speed: Un limited
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 20000 hours under normal use
Digimatic Holtests Series 468
Digimatic Holtests – Series 468 Three-Point Internal Micrometers
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.001mm or .00005″/0.001mm (over 5″ models: .0001″/0.001mm)
▶ Contact point:TiN-coating
▶ Measuring method: Three-point method
▶ Display: LCD
▶ Battery: SR44 (2 pcs.), 938882
▶ Battery life: Approx. 8 months under normal use
Digimatic Indicator ID-CX Series 543
ABSOLUTE Digimatic Indicator ID-CX Series 543-Standard Type
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm, 0.001mm, .0005″/0.01mm, .0001”/0.001mm or .00005”/0.001mm
▶ Display: LCD
▶ Length standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. Response speed: Unlimited
▶ Measuring force: Refer to the list of specifications
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 5,000 hours under normal use
▶ Dust/Water protection level: IP42 or IP53 (dust-proof type)