Back Plunger Type Indicators Series 1
Back Plunger Type Indicators Series 1
Technical Data
▶ Range: 1(plunger stroke: 4,5)
▶ Range per rev.: 1,27 mm
▶ Graduation: 0.01 mm
▶ Scale: 50-0-50
▶ Measuring force: 0,4 – 1,4 N
▶ Mass: 80 g
▶ Delivered: Delivered with factory certificate
▶ Balanced dial: Yes
▶ One revolution: Yes
▶ Shockproof: Yes
▶ Repeatability: 3 µm
▶ Any 1/10 revolution: 7 µm
▶ Hysteresis error: 3.5 µm
▶ Inch-Metric: Metric
Combination Square Sets Series 180
Combination Square Sets Series 180
▶ degrees to an edge of a workpiece.
▶ Center head: Used to locate centers of round workpieces
▶ Protractor head: Used to set the rule at a desired angle to
an edge of a workpiece. Also used for measuring angles.
Dial Indicators Series 1
Dial Indicators Series 1-Compact Type-Small Diameter
Features
▶ Range: 0.01 inch
▶ Graduation: 0.0001″
▶ Accuracy: ±0.0002″
▶ Range per rev.: 0.004″
▶ Repeatability: ±0.00003″
▶ Scale: 0-2-0
▶ Measuring force: ≤ 1.8 N
▶ Mass lug/plain: 50/47 g
▶ Balanced dial: Yes
▶ Jeweled bearing: Yes
▶ Functions: ANSI/AGD type
▶ Inch-Metric: Inch
Dial Indicators Series 2
Dial Indicators Series 2- Metric Standard Type
Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.
▶ Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard.
▶ The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
▶ Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
▶ The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
▶ A carbide contact point is used.
▶ The grand gear uses stainless steel that is resistant to wear and deformation.
▶ Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.
Dial Indicators Series 3
Dial Indicators Series 3-Large Stroke Type, Large Diameter
Technical Data
▶ Range: 10mm
▶ Graduation: 0.01mm
▶ Range/Rev: 1mm
▶ Dial Reading: +/- 0-100
▶ Type: with lug
▶ Accuracy: 0.015mm
▶ Measuring force: 1.4N or less
▶ Stem/Shank: 8mm
▶ Contact Point: M2.5 x 0.45 Thread
▶ Shockproof Type: N
▶ Jeweled Bearing Type: N
▶ With Coaxial Revolution Counter Type: N
▶ With Damper at Lowest Rest Point Type: N
▶ Type: ISO/JIS
Dial Test Indicators SERIES 513
Dial Test Indicators – SERIES 513-Horizontal Type
▶ Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access.
▶ No-clutch structure for automatic reversal of measuring direction.
▶ One-piece bezel and crystal design with O-ring provide resistance to water and dust.
▶ The glare-free flat crystal face has a scratch-resistant coating.
▶ High sensitivity and quick response because of jeweled bearings.
▶ Standard carbide contact point provide.
Digimatic Indicator ID-CX Series 543
ABSOLUTE Digimatic Indicator ID-CX Series 543-Standard Type
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm, 0.001mm, .0005″/0.01mm, .0001”/0.001mm or .00005”/0.001mm
▶ Display: LCD
▶ Length standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. Response speed: Unlimited
▶ Measuring force: Refer to the list of specifications
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 5,000 hours under normal use
▶ Dust/Water protection level: IP42 or IP53 (dust-proof type)
Digimatic Indicator ID-F Series 543
ABSOLUTE Digimatic Indicator ID-F SERIES 543 — with Back-lit LCD Screen
Technical Data
▶ Accuracy: Refer to the list of specifications (excluding quantizing error)
▶ Resolution: 0.01mm/0.001mm or .00005”/.0001”/.0005” /.001”/0.001mm/0.01mm
▶ Display: LCD Character Height 8.5mm
▶ Scale type: ABSOLUTE electrostatic linear encoder
▶ Max. response speed: Unlimited
▶ Measuring force: 1.8N/2.3N* or less (*50mm range models)
▶ Stem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)
▶ Contact point: Carbide ball with M2.5×0.45 (ISO/JIS type) Carbide ball with #4-48UNF (ANSI/AGD type) Power supply: 9V DC (via AC adaptor)
Digimatic Indicator ID-SS Series 543
ABSOLUTE Solar Digimatic Indicator ID-SS Series 543-With Simple Design
Technical Data
▶ Accuracy: Refer to the list of specifications
▶ Resolution: 0.01mm, 0.001mm, .00005”/0.001mm, or .0005”/0.01mm
▶ Display: LCD
▶ Length Standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. Response Speed: Unlimited
▶ Measuring Force: Refer to the list of specifications
▶ Battery: Solar Battery*
▶ Dust/Water Protection Level: IP42
*can be used continuously above 40 lux
Digimatic Indicator ID-SX Series 543
ABSOLUTE Solar Digimatic Indicator ID-SX Series 543-With Simple Design
▶ Display: 6-digit LCD and sign
▶ Scale type: ABSOLUTE electrostatic linear encoder
▶ Usable orientation: All
▶ Power supply: SR44, part No. 938882 for initial
operational checks (standard accessory)
▶ Maximum response speed: No limit (scan-type measurement is not supported)
▶ Operating temperature range: 0 to 40ºC
▶ Storage temperature range: -10 to 60ºC
▶ Contact point: Spherical tip SR = 1.5 mm (carbide tipped)
part No. 901312 (for ISO/JIS/DIN Type),
part No. 21BZB005 (for ASME/ANSI/AGD Type)
Pocket Type Dial Test Indicators Series 513
Pocket Type Dial Test Indicators-Series 513
Technical Data
▶ Range: 0.5 mm
▶ Graduation: 0.01 mm
▶ Scale: 0-25-0
▶ Measuring force: ≤ 0,3 N
▶ Carbide stylus tip ø2 mm No.: 131324
▶ Mass: 41 g
▶ Contact point: Thread M 1,7 x 0,35
▶ Delivered: In box with clamping shaft ø8 mm
▶ Long stylus: Yes
▶ Functions: Basic set
▶ Inch-Metric: Metric
▶ MPE any 10 scale divisions: 5
▶ MPE measuring range: 10
▶ Hysteresis: 4
▶ Repeatability: 3
Thickness Gages Series 547
Thickness Gages Series 547, 7
Technical Data
Function of Digital Models
IDS Types
▶ ON/OFF
▶ Inch/mm Conversion
▶ Origin
▶ ±Direction Changeover
▶ SPC Output
▶ Battery Life:20,000 hrs
▶ Power Supply:Silver Oxide Cell (SR-44 1pc.) IDC Types
▶ Zero/ABS
▶ Battery Life:5,000 hrs
▶ Preset
▶ Provides GO/±NG Judgment
▶ Face Rotates 330°