ABSOLUTE Digimatic Caliper Series 500-with Exclusive ABSOLUTE Encode Technology
Mitutoyo’s absolute Digimatic Caliper is the next generation of electronic calipers.
It keeps track of its origin point once set. Whenever turned on, the large LCD
displays the actual slider position ready to start measurement. No more repeated
zero setting is necessary with the absolute encoder technology, as well as no more
concern for over speed errors.
– Large and clear LCD readout.
– The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
– Data Hold Unit (959143) is optional.
– Carbide-tipped jaw type calipers are also available.
– With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
– Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
Technical Data
Accuracy: Refer to the list of specifications
Resolution: 0.01mm or .0005″/0.01mm
Repeatability: 0.01mm / .0005”
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Function
Origin-set, Zero-setting, Data output, inch/mm conversion
(inch/mm models ONLY)
Alarm: Low voltage, Counting value composition error
Optional Accessories
959143: Data hold unit
959149: SPC cable with data switch (1m / 40”)
959150: SPC cable with data switch (2m / 80”)
*without SPC data output
Metric |
| Order No | Model | Image | Range | Accuracy | LCD Res | Remarks |
| 500-150-30 | AOS Digimatic Caliper | – | 0-100mm | ±0.02mm | 0.01mm | Ø1.9mm rod depth bar |
| 500-151-30 | Digimatic Caliper |  | 0-150mm | ±0.02mm | 0.01mm | – |
| 500-154-30 | Digimatic Caliper |  | 0-150mm | ±0.02mm | 0.01mm | Carbide-tipped jaws for OD measurement |
| 500-155-30 | AOS Digimatic Caliper |  | 0-150mm | ±0.02mm | 0.01mm | Carbide-tipped jaws for OD and ID measurement |
| 500-158-30 | AOS Digimatic Caliper | – | 0-150mm | ±0.02mm | 0.01mm | Ø1.9mm rod depth bar |
| 500-152-30 | AOS Digimatic Caliper | – | 0-200mm | ±0.02mm | 0.01mm | – |
| 500-156-30 | AOS Digimatic Caliper | – | 0-200mm | ±0.02mm | 0.01mm | Carbide-tipped jaws for OD measurement |
| 500-157-20 | Digimatic Caliper |  | 0-200mm | ±0.02mm | 0.01mm | Carbide-tipped jaws for OD and ID measurement |
| 500-153 | Digimatic Caliper |  | 0-300mm | ±0.03mm | 0.01mm | – |
| 500-500-10* | Digimatic Caliper |  | 0-450mm | ±0.05mm | 0.01mm | Without Thumb Roller |
| 500-501-10* | Digimatic Caliper |  | 0-600mm | ±0.05mm | 0.01mm | Without Thumb Roller |
| 500-502-10 | Digimatic Caliper |  | 0-1000mm | ±0.07mm | 0.01mm | Without Thumb Roller |
Inch/Metric |
| Order No | Model | Image | Range | Accuracy | LCD Res | Remarks |
| 500-170-30 | AOS Digimatic Caliper |  | 0-4in 0-100mm | ±.001in | .0005in 0.01mm | .075″ Round depth bar |
| 500-195-30* | AOS Digimatic Caliper | – | 0-4in 0-100mm | ±.001in | .0005in 0.01mm | .075″ Round depth bar |
| 500-171-30 | AOS Digimatic Caliper | – | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | – |
| 500-174-30 | AOS Digimatic Caliper | – | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | with OD carbide jaw |
| 500-175-30 | AOS Digimatic Caliper | – | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | with OD,ID carbide jaw |
| 500-178-30 | AOS Digimatic Caliper | – | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | .075 in rod depth bar |
| 500-196-30* | AOS Digimatic Caliper |  | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | – |
| 500-159-30* | AOS Digimatic Caliper | – | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | Carbide-tipped jaws for OD measurement |
| 500-160-30* | AOS Digimatic Caliper | – | 0-6in 0-150mm | ±.001in | .0005in 0.01mm | Carbide-tipped jaws for OD and ID measurement |
| 500-172-30 | AOS Digimatic Caliper | – | 0-8in 0-200mm | ±.001in | .0005in 0.01mm | – |
| 500-176-30 | AOS Digimatic Caliper | – | 0-8in 0-200mm | ±.001in | .0005in 0.01mm | with OD carbide jaw |
| 500-177-30 | AOS Digimatic Caliper | – | 0-8in 0-200mm | ±.001in | .0005in 0.01mm | with OD,ID carbide jaw |
| 500-197-30* | AOS Digimatic Caliper |  | 0-8in 0-200mm | ±.001in | .0005in 0.01mm | – |
| 500-163-30* | AOS Digimatic Caliper |  | 0-8in 0-200mm | ±.001in | .0005in 0.01mm | Carbide-tipped jaws for OD measurement |
| 500-164-30* | AOS Digimatic Caliper | – | 0-8in 0-200mm | ±.001in | .0005in 0.01mm | Carbide OD/ID Jaws |
| 500-173 | Digimatic Caliper |  | 0-12in 0-300mm | ±.0015in | .0005in 0.01mm | – |
| 500-167 | Digimatic Caliper |  | 0-12in 0-300mm | ±.0015in | .0005in 0.01mm | Carbide-tipped jaws for OD measurement |
| 500-168 | Digimatic Caliper |  | 0-12in 0-300mm | ±.0015in | .0005in 0.01mm | Carbide-tipped jaws for OD and ID measurement |
| 500-193* | Digimatic Caliper |  | 0-12in 0-300mm | ±.0015in | .0005in 0.01mm | – |
| 500-165* | Digimatic Caliper |  | 0-12in 0-300mm | ±.0015in | .0005in 0.01mm | Carbide-tipped jaws for OD measurement |
| 500-166* | Digimatic Caliper |  | 0-12in 0-300mm | ±.0015in | .0005in 0.01mm | Carbide-tipped jaws for OD and ID measurement |
| 500-505-10 | Digimatic Caliper |  | 0-18in 0-450mm | ±.002in | .0005in 0.01mm | Without Thumb Roller |
| 500-506-10 | Digimatic Caliper |  | 0-24in 0-600mm | ±.002in | .0005in 0.01mm | Without Thumb Roller |
| 500-507-10 | Digimatic Caliper |  | 0-40in 0-1000mm | ±.003in | .0005in 0.01mm | Without Thumb Roller |
รีวิว
ยังไม่มีบทวิจารณ์