Dial Snap Meters Series 523
Dial Snap Meters – Series 523
Technical Data
▶ Dial indication accuracy: 1µm / .00005”
▶ Indication repeatability: 0.4µm / .00002”
▶ Dial reading: 0.001mm or .00005″
▶ Flatness: 0.3µm / .000012”
▶ Parallelism: 0.6µm / .000024” for
models up to 50mm / 2”
1µm / .00004” for models over 50mm / 2”
▶ Measuring force: 5 – 10N (500 – 1000gf)
Dial Test Indicators SERIES 513
Dial Test Indicators – SERIES 513-Horizontal Type
▶ Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access.
▶ No-clutch structure for automatic reversal of measuring direction.
▶ One-piece bezel and crystal design with O-ring provide resistance to water and dust.
▶ The glare-free flat crystal face has a scratch-resistant coating.
▶ High sensitivity and quick response because of jeweled bearings.
▶ Standard carbide contact point provide.
Digimatic & Vernier Caliper Series 550
ABSOLUTE Digimatic & Vernier Caliper Series 550,160-with Nib Style Jaws
Technical Data
▶ Accuracy: Refer to the list of specifications
▶ Display*: LCD
▶ Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. response speed*: Unlimited
▶ Battery*: SR44 (1 pc.), 938882
▶ Battery life*: Approx. 3.5 years under normal use
*Digital models **Analog models
Digimatic Caliper Series 551
ABSOLUTE Digimatic Caliper Series 551 with Nib Style and Standard Jaws
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution*: 0.01mm or .0005″/0.01mm
▶ Display*: LCD
▶ Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. response speed*: Unlimited
▶ Battery*: SR44 (1 pc.),938882
▶ Battery life*: Approx. 3.5 years under normal use
Digimatic Depth Gage Series 547
ABSOLUTE Digimatic Depth Gage Series 547
Technical Data
▶ Resolution*: 0.001mm, 0.01mm, .00005″/0.001mm or .0005”/0.01mm
▶ Flatness of base face: 5µm
▶ Measuring force: 1.4N, 1.5N
▶ Display: LCD
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 3.5 years under normal use
Digimatic Height Gage Series 192-Multi-Function
Digimatic Height Gage Series 192-Multi-Function Type with SPC Data Output
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Display: LCD, 7-digit
▶ Max. response speed: 500mm/s
▶ Battery: SR44(1pc.), 938882
▶ Battery life: Approx. 2000 hours under normal use
Digimatic Height Gage Series 192-Standard
Digimatic Height Gage Series 192-Standard Type with SPC Data Output
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Display: LCD, 7-digit charter height 11mm
▶ Max. response speed: 500mm/s
▶ Battery: SR44(1pc.), 938882
▶ Battery life: Approx. 2000 hours under normal use
Digimatic Height Gage Series 570
ABSOLUTE Digimatic Height Gage Series 570-with ABSOLUTE Linear Encoder.
Technical Data
▶ Resolution: 0.01mm or .0005″/0.01mm
▶ Display: LCD, 6-digit
▶ Length standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. response speed: Un limited
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 20000 hours under normal use
Digimatic Holtests Series 468
Digimatic Holtests – Series 468 Three-Point Internal Micrometers
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.001mm or .00005″/0.001mm (over 5″ models: .0001″/0.001mm)
▶ Contact point:TiN-coating
▶ Measuring method: Three-point method
▶ Display: LCD
▶ Battery: SR44 (2 pcs.), 938882
▶ Battery life: Approx. 8 months under normal use
Digimatic Indicator ID-CX Series 543
ABSOLUTE Digimatic Indicator ID-CX Series 543-Standard Type
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.01mm, 0.001mm, .0005″/0.01mm, .0001”/0.001mm or .00005”/0.001mm
▶ Display: LCD
▶ Length standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. Response speed: Unlimited
▶ Measuring force: Refer to the list of specifications
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 5,000 hours under normal use
▶ Dust/Water protection level: IP42 or IP53 (dust-proof type)
Digimatic Indicator ID-F Series 543
ABSOLUTE Digimatic Indicator ID-F SERIES 543 — with Back-lit LCD Screen
Technical Data
▶ Accuracy: Refer to the list of specifications (excluding quantizing error)
▶ Resolution: 0.01mm/0.001mm or .00005”/.0001”/.0005” /.001”/0.001mm/0.01mm
▶ Display: LCD Character Height 8.5mm
▶ Scale type: ABSOLUTE electrostatic linear encoder
▶ Max. response speed: Unlimited
▶ Measuring force: 1.8N/2.3N* or less (*50mm range models)
▶ Stem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)
▶ Contact point: Carbide ball with M2.5×0.45 (ISO/JIS type) Carbide ball with #4-48UNF (ANSI/AGD type) Power supply: 9V DC (via AC adaptor)
Digimatic Indicator ID-SS Series 543
ABSOLUTE Solar Digimatic Indicator ID-SS Series 543-With Simple Design
Technical Data
▶ Accuracy: Refer to the list of specifications
▶ Resolution: 0.01mm, 0.001mm, .00005”/0.001mm, or .0005”/0.01mm
▶ Display: LCD
▶ Length Standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. Response Speed: Unlimited
▶ Measuring Force: Refer to the list of specifications
▶ Battery: Solar Battery*
▶ Dust/Water Protection Level: IP42
*can be used continuously above 40 lux
Digimatic Indicator ID-SX Series 543
ABSOLUTE Solar Digimatic Indicator ID-SX Series 543-With Simple Design
▶ Display: 6-digit LCD and sign
▶ Scale type: ABSOLUTE electrostatic linear encoder
▶ Usable orientation: All
▶ Power supply: SR44, part No. 938882 for initial
operational checks (standard accessory)
▶ Maximum response speed: No limit (scan-type measurement is not supported)
▶ Operating temperature range: 0 to 40ºC
▶ Storage temperature range: -10 to 60ºC
▶ Contact point: Spherical tip SR = 1.5 mm (carbide tipped)
part No. 901312 (for ISO/JIS/DIN Type),
part No. 21BZB005 (for ASME/ANSI/AGD Type)
Digimatic Micrometer Series 293
Digimatic Micrometer Series 293
▶ Accuracy: Refer to the list of specificatictions
▶ Resolution: 0.001mm or .00001″/0.001mm
▶ Flatness: 0.6µm / .000024”
▶ Parallelism: 5µm / .0002” for models up to 375mm / 15”
6µm / .00024” for models up to 475mm/19”
7µm / .00028” for models over 500mm / 20”
▶ Display: LCD
▶ Battery: SR44 (2 pcs.), 938882
▶ Battery life: Approx. 1.8 years under normal use
DIGITAL BRINELL HARDNESS TESTER SHB-3000C
DIGITAL BRINELL HARDNESS TESTER SHB-3000C
▶ SHB-3000C is a half automatic and intelligent Brinell hardness testing machine,it adopts the load cell to replace the traditional quality weight,this innovative design makes the instrument more accurate;
▶ Selection of testing force and dwell time is controlled and monitored on the front panel,
it is automatic during the process of loading, dwell and unloading;
▶ SHB-3000C adopts digital Brinell microscopes with adjustable LED illuminator,it doesn’t need the operator to read the detail length of indentation,it only needs operator to aim the D1, D2 diagonal of indentation and press the length key twice above the Microscope,then the built-in computer can computer the Brinell scale and display the final testing result on LCD display automatically;
▶ SHB-3000C supports the hardness conversion ,it can use Brinell scale to get conversion scale of HRC, HRB, HRC, HV, etc.
DIGITAL TWIN VICKERS / BRINELL HARDNESS TESTER VICKY VB-62.5
DIGITAL TWIN VICKERS / BRINELL HARDNESS TESTER VICKY VB-62.5
▶ Vicky VB-62.5 is equipped with Brinell and Vickers test methods, njust replace indenter to do specific testing.
▶ Standard delivery comes with 5x and 10x objectives, all of them can do measurement, indenter and objective switches motorized;
▶ Available to preset dwell time, illumination brightness
▶ Motorized turret, close loop loading system and touch screen/control panel input
▶ Innovative design of color touch screen, shows force selection, dwell time, hardness conversion, etc
▶ Hardness result can be converted to HK, HBW, HRA, HRC, HV and superficial Rockwell scales
▶ Equipped with blue tooth module, realize the wireless data transfer to computer and mini printer
▶ In order to avoid operation erroroptional measurement software MV-200S and MB is a good choice.
DRV-Z1 | Vision Engineering
Digital Stereo 3D viewer with Zoom
DRV-Z1 is a digital stereo 3D viewer with zoom that brings together the benefits of optical stereo microscopy and digital technology into a single unique system.
- 6x – 186x magnification
- Digital stereo 3D with vivid depth perception
- Remote viewing of stereo 3D images in real-time
Highlights
- Digital stereo magnification with 3D depth perception
- Unparalleled hand to eye coordination
- Remote viewing and sharing of live 3D images
- Globally patented 3D technology
- 10:1 zoom ratio for greater flexibility of application
- Long working distances and low light requirement
- Large field of view increasing efficiency and ease of working
- Users able to wear spectacles for eye correction or safety
- No special eyewear or VR head sets
- Optimised ergonomics
ECONOMICAL MANUAL MICRO VICKERS HARDNESS TESTER HV-1000 SERIRS
ECONOMICAL MANUAL MICRO VICKERS HARDNESS TESTER HV-1000 SERIRS
▶ The micro hardness testing of materials allows for the determination of the hardnessof small or thin specimens and small areas of larger specimens,
▶ Micro hardness testing is commonly used to determine characteristics of thin sheets,foils, fine wire, epoxies, paints, etc. and is often employed in R&D applications.
▶ Micro hardness is especially useful in determining hardness variations, by hardening,quenching, plating, fabrication, welding or annealing, bonding,etc.
▶ Micro hardness testing can be accurately employed using loads as slight as 1 gram,somewhat less and considerably more in certain situation.
EISEN PIN GAUGES ET SERIES
EISEN PIN GAUGES ET SERIES
▶ ET Series gauges have a tolerance of ±0.3μm and are supplied in increments of 1 μm, capable of checking inside diameters by 0.001 mm steps.
▶ Standard set contain 1 4 gauges.
▶ Specially assorted sets or individual gauges also available on request.
ELECTRONIC BRINELL HARDNESS TESTER SHB-3000E
ELECTRONIC BRINELL HARDNESS TESTER SHB-3000E
▶ SHB-3000E adopts the load cell to replace the traditional weight,this innovative design makes the instrument more accurate.
▶ Selection of testing force and dwell time is controlled and monitoredon the front panel, it is automatic during the process of loading,dwell and unloading.
▶ SHB-3000E uses 20x Brinell measuring microscope to measurethe diameter of indentation,then the operator traces the Brinell hardness table to get the testing result.
ELECTRONIC SUPERFICIAL ROCKWELL HARDNESS TESTER DIGIROCK M SERIES
ELECTRONIC SUPERFICIAL ROCKWELL HARDNESS TESTER DIGIROCK M SERIES
▶ DigiRock MR2/MS2 analoguegauge resolution is 0.5HR,
it is useful to improve the reading accura cy tha trnaditional 1HR resolution;
▶ DigiRock MR2/MS2 dwell time from 1to 60s can be setup by the “time key” on the panel ,
it is much convenient than the setup on the manual hardness tester;
▶ DigiRock MR2/MS2 force knob adopts the metal material to replace the plastic,
it largely improves the instrument using-life;
▶ DigiRock MR2/MS2 loading, dwell and unloading is buffering by electronic motor automatically,
doesnt need the operator to handle it , it eliminates the human operation error maximally;
▶ DigiRock MR2/MS2 intenter protector is available to improve the using lifetime of indenter.
ELECTRONIC TWIN ROCKWELL HARDNESS TESTER DIGIROCK SR2
ELECTRONIC TWIN ROCKWELL HARDNESS TESTER DIGIROCK SR2
▶ DigiRock SR2 can test both Rockwell and Superficial Rockwell hardness scales.
▶ Manually switch 3kgf and 10kgf initial force, to test Rockwell and
superficial Rockwell scales.
▶ Dial reading, resolution is 0.5HR.
▶ Motorized loading/dwelling/unloading to make precision force and excellent results.
EVO Cam II Vision Engineering brand (Digital Microscope)
High Performance Full-HD Digital Microscope
An high definition digital microscope with stunning image quality, that combines optical excellence with ease of use and efficient workflows.
EVO Cam II makes image capture and documentation simpler, faster and more reliable.
• Exceptional high resolution 1080p/60fps image quality
• Optical magnification up to 300x
• Stand alone, wireless or PC connectivity
EVOTIS | Technical Inspection System | กล้องตรวจสอบชิ้นงาน
EVOTIS
Technical Inspection System
EVOTIS Technical Inspection System provides a specialist workstation for advanced inspection of Printed Circuit Board (PCB) and large multi-layer components.
• Fast inspection of large and complex components
• Magnification range from 3.7x to 300x
• 3D 360° rotating view (at 34° angle)