Digimatic Indicator ID-F Series 543
ABSOLUTE Digimatic Indicator ID-F SERIES 543 — with Back-lit LCD Screen
Technical Data
▶ Accuracy: Refer to the list of specifications (excluding quantizing error)
▶ Resolution: 0.01mm/0.001mm or .00005”/.0001”/.0005” /.001”/0.001mm/0.01mm
▶ Display: LCD Character Height 8.5mm
▶ Scale type: ABSOLUTE electrostatic linear encoder
▶ Max. response speed: Unlimited
▶ Measuring force: 1.8N/2.3N* or less (*50mm range models)
▶ Stem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)
▶ Contact point: Carbide ball with M2.5×0.45 (ISO/JIS type) Carbide ball with #4-48UNF (ANSI/AGD type) Power supply: 9V DC (via AC adaptor)
Digimatic Indicator ID-SS Series 543
ABSOLUTE Solar Digimatic Indicator ID-SS Series 543-With Simple Design
Technical Data
▶ Accuracy: Refer to the list of specifications
▶ Resolution: 0.01mm, 0.001mm, .00005”/0.001mm, or .0005”/0.01mm
▶ Display: LCD
▶ Length Standard: ABSOLUTE electrostatic capacitance type linear encoder
▶ Max. Response Speed: Unlimited
▶ Measuring Force: Refer to the list of specifications
▶ Battery: Solar Battery*
▶ Dust/Water Protection Level: IP42
*can be used continuously above 40 lux
Digimatic Indicator ID-SX Series 543
ABSOLUTE Solar Digimatic Indicator ID-SX Series 543-With Simple Design
▶ Display: 6-digit LCD and sign
▶ Scale type: ABSOLUTE electrostatic linear encoder
▶ Usable orientation: All
▶ Power supply: SR44, part No. 938882 for initial
operational checks (standard accessory)
▶ Maximum response speed: No limit (scan-type measurement is not supported)
▶ Operating temperature range: 0 to 40ºC
▶ Storage temperature range: -10 to 60ºC
▶ Contact point: Spherical tip SR = 1.5 mm (carbide tipped)
part No. 901312 (for ISO/JIS/DIN Type),
part No. 21BZB005 (for ASME/ANSI/AGD Type)
Digimatic Micrometer Series 293
Digimatic Micrometer Series 293
▶ Accuracy: Refer to the list of specificatictions
▶ Resolution: 0.001mm or .00001″/0.001mm
▶ Flatness: 0.6µm / .000024”
▶ Parallelism: 5µm / .0002” for models up to 375mm / 15”
6µm / .00024” for models up to 475mm/19”
7µm / .00028” for models over 500mm / 20”
▶ Display: LCD
▶ Battery: SR44 (2 pcs.), 938882
▶ Battery life: Approx. 1.8 years under normal use
High-Accuracy Digimatic Micrometer Series 293
MDH Micrometer High-Accuracy Sub-Micron Digimatic Micrometer
Technical Data
▶ Flatness: 0.3μm/.000012”
▶ Parallelism: 0.6μm/.000024
▶ Measuring force: 7 to 9N
▶ Power supply: Lithium battery 05SAA217 (CR2032) x 1
▶ Battery life: Approx. two years when used under normal conditions
Holtest (Type II) Series 368
Holtest (Type II) Series 368-Three-Point Internal Micrometers
Technical Data
▶ Graduation: 0.005mm or .0002″
▶ Measuring method: Three-point method
▶ Contact point: Harden Steel
Holtests Series 368-Three-point
Holtests – Series 368-Three Point/Two-Point Internal Micrometers
Technical Data
▶ Graduation: 0.001mm, 0.005mm*,
.0001″ or .0002″* (*over 12mm or .5” models)
Micrometer Stands Series 156
Micrometer Stands – Series 156
▶ These stands are designed to allow bench-top use with hand micrometers or other gages.
MITUTOYO data input unit input tool series it-016u / it-007r
Measurement Data Input Unit Input Tool SERIES It-016U / IT-007R
▶ Output specification: RS-232C compliat
▶ Communication method: Full duplex
▶ Communication speed: 2400bps (fixed)
▶ bit configuration: Start bit 1, data length 8, (Most significant bit, 0 (fixed)), parity, None, Stop bit1
▶Flow control: None
▶Home position: DCE (modem definiton)
MITUTOYO DP 1VR Series 264 Digimatic Mini Processor
MITUTOYO DP 1VR Series 264 Digimatic Mini Processor
Technical Data
▶ Printing method: Thermal line printer
▶ Printing dot: 384dot (8dot/mm)
▶ Printing speed: 6.5mm/s (using AC adapter)
▶ Printing paper: 48m
▶ Printing line: Approx. 6500 lines for large characters
Approx. 12000 lines for normal characters
▶ Processing capacity: 9999 data (mode 1/2/3) , 100000 data (mode 0)
Printing data: Measurement data, GO/±NG judgment, No. of data, Max/min value, Range, Average, Standard deviation, No. of defective, Fraction defective, Process capability index, Histogram, D-chart, Control chart generation, for Xd-bar and control limit data, date and time
Output function: Output the measuring data (RS232C) or GO/±NG judgment
▶ Input timer: 0.25s, 1s, 5s, 30s, 1min, 30min, 60min
▶ Power: AC adapter 6V
▶ Electric battery: LR6 (alkaline), Ni-Mh (AA size)
▶ Battery life: 10 years (clock battery), 10000 lines (1600mA 1 time/5 sec. using the nickel hydrofluoric battery), Dimensions (W x D x H): 94 x 201 x 75.2mm
▶ Mass: 390g
Mitutoyo M-340 Series
ไมโครมิเตอร์สำหรับวัดด้านนอกแบบเปลี่ยนแกนวัดได้
▶ ช่วงการวัดกว้างที่สามารถเปลี่ยนแกนวัดได้
▶ แกนหน้าสัมผัสผลิตจากวัสดุ Carbide
▶ กันน้ำ, กันฝุ่น มาตรฐาน IP 65
▶ ระบบการหมุนแบบ Ratchet Stop
▶ ยี่ห้อ Mitutoyo, Japan
MITUTOYO Measurement Data Wireless Communication System
MITUTOYO Measurement Data Wireless Communication System
FEATURES
▶ The U-WAVE system enables easy wireless data communication from a measuring tool to a PC using the Digimatic protocol.
Measurement efficiency is improved by eliminating the long and cumbersome data cables.
The user friendly interface allows
data to be loaded into any software product that accepts keyboard input, such as Excel* or Notepad.
Operating Systems: Windows XP, Window 7 and Windows 8
MITUTOYO pc data input device series 264
MITUTOYO PC Data Input Device SERIES 264 – USB Input Tool Direct
▶ Output compatibility: USB1.1 and USB2.0
▶Supporting driver software: Switchable between 2 items below
(1) When using standalone: HID keyboard device
(2) When using with USB-ITPAK V2.0: Virtual COM port (VCP)
▶ Communication speed: 12 Mbps (Full Speed)
▶ Power supply: USB bus power
▶ Mass: 59g
▶ USB2.0 certificate
▶Conforms to EMC Directives.
*Since this device is compatible with windows standard driver software, dedicated driver software is not required
MITUTOYO rs-323c interface unit multiplexer mux-10f
MITUTOYO rs-323c interface unit multiplexer mux-10f
The MUX-10F 4 channel D-SUB9 serial interface is a microcontrolled interface that connects four measurement devices, with Digimatic output, to the RS-232C serial port of a computer.
▶ You can connect four measurement devices to an RS-232C serial port.
Outside Micrometers – Series 102
Outside Micrometers – Series 102
Technical Data
▶ Graduation: 0.01mm
▶ Flatness:0.3µm
▶ Parallelism:
1µm for 25mm model
3µm for models up to 100mm
▶ Measuring faces: Carbide tipped
Outside Micrometers Series 103
Outside Micrometers Series-103 METRIC
Technical Data
▶ Graduation: 0.01mm, 0.001mm
▶ Flatness: 0.6µm for models up to 300mm
1µm for models over 300mm
▶ Parallelism: (2+R/100)µm, R=max. range (mm)
▶ Measuring faces: Carbide tipped
Outside Micrometers Series 193
Digital Outside Micrometers – Series 193
▶ Accuracy: Refer to the list of specifications.
▶ Counter reading: 0.01mm or .001″
▶ Graduation: 0.01mm, 0.001mm, .001″ or .0001″
▶ Flatness: 0.6ìm / .000024”
▶ Parallelism: (2+R/100)µm, R=max. range (mm)
[.00008” + .00004” (L/4)]”, L= max. range (inch)
▶ Measuring faces: Carbide tipped
Outside Micrometers Series 406
Outside Micrometers – Series 406- Non-Rotating Spindle Type
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution*: 0.001mm or .00005″/0.001mm
▶ Flatness: 0.3µm / .000012”
▶ Parallelism: 3µm / .00012” for models up to 75mm / 3”* 4µm / .000016” for models over 75mm / 3”* 1.6µm / .000063” for models up
to 50mm / 2”** 2µm / .00008” for models over 50mm / 2”**
▶ Measuring faces: Carbide tipped
▶ Display*: LCD
▶ Battery*: SR44 (1 pc.), 938882
▶ Battery life*: Approx. 1.2 years under normal use
Pocket Type Dial Test Indicators Series 513
Pocket Type Dial Test Indicators-Series 513
Technical Data
▶ Range: 0.5 mm
▶ Graduation: 0.01 mm
▶ Scale: 0-25-0
▶ Measuring force: ≤ 0,3 N
▶ Carbide stylus tip ø2 mm No.: 131324
▶ Mass: 41 g
▶ Contact point: Thread M 1,7 x 0,35
▶ Delivered: In box with clamping shaft ø8 mm
▶ Long stylus: Yes
▶ Functions: Basic set
▶ Inch-Metric: Metric
▶ MPE any 10 scale divisions: 5
▶ MPE measuring range: 10
▶ Hysteresis: 4
▶ Repeatability: 3
QuantuMike Series 293
QuantuMike Series 293-Coolant Proof Micrometer
Technical Data
▶ Accuracy: Refer to the list of specifications.
▶ Resolution: 0.001mm or .00005″/0.001mm
▶ Flatness:0.3µm/.000012”
▶ Parallelism: 1µm/.00004” for models up to 50mm/2”
▶ 2µm/.00008” for models up to 100mm/4”
▶ Measuring faces: Carbide tipped
▶ Display: LCD
▶ Battery: SR44 (1 pc.), 938882
▶ Battery life: Approx. 1.2 years under normal use
▶ (8 months: over 100mm models)
▶ Dust/Water protection level: IP65
Setting Ring Series 177
Setting Ring Series 177-Accessories for Inside Micrometers,Holtest and Dial Bore Gages
▶ If a setting ring of an optimal size is prepared, it can be used for calibration.
Thickness Gages Series 547
Thickness Gages Series 547, 7
Technical Data
Function of Digital Models
IDS Types
▶ ON/OFF
▶ Inch/mm Conversion
▶ Origin
▶ ±Direction Changeover
▶ SPC Output
▶ Battery Life:20,000 hrs
▶ Power Supply:Silver Oxide Cell (SR-44 1pc.) IDC Types
▶ Zero/ABS
▶ Battery Life:5,000 hrs
▶ Preset
▶ Provides GO/±NG Judgment
▶ Face Rotates 330°